Thermal Engineer (Falcon, Dragon, & Starfall) at SpaceX
Hawthorne, CAFalcon and Dragon Avionics & Software EngineeringPosted Aug 1, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
THERMAL ENGINEER (FALCON, DRAGON & STARFALL)
The Aero/Thermal/Fluids (ATF) group owns the thermal design of SpaceX's launch vehicles, spacecraft, and hardware for Falcon, Dragon, and Starfall. As a thermal engineer in ATF, you will take hardware from a blank page: setting the thermal architecture, sizing the design, driving it through CAD and build, and validating it against ground test, flight, and on-orbit data. You'll make the engineering calls that keep components within limits across every phase of flight - ascent, on-orbit, reentry, and improve system performance to help us fly more, and more reliably. The group's charter also spans aerothermal and vehicle fluid systems, so there's ample room to broaden into adjacent disciplines, but this role's center of gravity is clean-sheet-to-built-hardware thermal design and analysis.
RESPONSIBILITIES:
- Own the thermal design of spacecraft, launch-vehicle, special-program, and component hardware end-to-end: from initial concept and high-level trades, through detailed 3D and reduced-order modeling, into CAD/build, and out to validation against ground test, flight, and orbital data (e.g. on-orbit thermal analysis, thermal protection system (TPS) sizing, heater and coolant-loop design, acceptance/qualification test-level derivation, issue-ticket resolution)
- Translate thermal analysis into real design decisions — materials, coatings, insulation, interfaces, heater and TCS architecture — and carry them from concept to flight hardware
- Automate your workflow to cut engineering investment in the design cycle
- Pursue performance and robustness improvements in the hardware
- Pursue operational simplicity and reduce the burden your designs place on other groups at SpaceX
- Produce quality documentation of your work to reduce miss-rate and improve efficiency
- Review peer work
BASIC QUALIFICATIONS:
- Bachelor's degree in an engineering discipline
- 1+ years of experience using programming languages including, but not limited to, Python, MATLAB, and EES (internships and school projects apply)
PREFERRED SKILLS AND EXPERIENCE:
- Experience taking hardware from clean-sheet concept through detailed design, build, and test validation
- Experience with Thermal Desktop and ANSYS Workbench
- Experience with 3D and reduced-order thermal modeling
- Ability to identify analysis cases and quickly evaluate the impact of design decisions on the hardware
- Experience sizing TPS using reduced-order modeling
- Experience with the Fully Implicit Ablation and Thermal Analysis Program (FIAT)
- Experience with Sinda/Fluint
- Experience with propulsion and vehicle fluid-system design and analysis
- Excellent oral and written communication skills
- Ability to deliver against an aggressive schedule
- Fundamentals in aerodynamics and aerothermal analysis; exposure to CFD (FUN3D, DPLR, US3D, LociChem) and mesh generation (Pointwise, StarCCM+)
ADDITIONAL REQUIREMENTS:
- Must be available to work extended hours and weekends as needed
COMPENSATION AND BENEFITS:
Pay range: Level I: $100,000.00 - $117,500.00/per year Level II: $115,000.00 - $140,000.00/per year
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| GNC Engineer (Starship) Starship GNC | — | Tailor | |
| Supplier Quality Specialist (SpaceXSI) Starlink - Supply Chain Engineering | — | Tailor | |
| SPMT Operator - Transport (Starship) Starship Critical Lift & Transport | — | Tailor | |
| Critical Lift Technician - Transport (Starship) Starship Critical Lift & Transport | — | Tailor |
- Sr. Sourcing Specialist (Network Infrastructure)Austin, TXNov 21Supercompute and Operations
- Sr. Sourcing Specialist (Network Infrastructure)Bastrop, TXNov 21Supercompute and Operations
- GNC Engineer (Starship)Starbase, TXNov 21Starship GNC
- Supplier Quality Specialist (SpaceXSI)Bastrop, TXNov 21Starlink - Supply Chain Engineering
- SPMT Operator - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport
- Critical Lift Technician - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport