Sr. Packaging Engineer - Thermal Materials, AI Satellites (Starmind) at SpaceX
Bastrop, TXMesh OpticalPosted Jul 22, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
SR. PACKAGING ENGINEER – THERMAL MATERIALS, AI SATELLITES (STARMIND)
SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high performance electrical compute hardware, solar power systems, thermal radiators, and more. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.
The Starmind team designs, builds, and operates the orbital compute fabric of the future. We develop nearly every key piece of technology in house – from the satellites’ flight computers and power systems to the fully custom compute electronics, memory, and networking that form the brain of our on-orbit data centers. As a Sr. Packaging Engineer on the Starmind team, you’ll have ownership over the entire life-cycle of the hardware that enables advanced on-orbit AI processing and data center workloads. Your work sits at the intersection of process, packaging, materials, and thermal engineering. The Payload team is responsible for the design of industry-leading compute electronics, memory, and networking in order to achieve required domain sizes and processing workloads.
RESPONSIBILITIES:
- Own the full lifecycle of advanced packaging through board assembly process development— including requirements capture, materials selection, prototyping, process optimization, manufacturing, and failure analysis.
- Drive system trades, requirements capture, materials selection, prototyping, manufacturing, failure analysis.
- Spearhead the development integrated thermal solutions including next generation TIMs to improve package performance.
- Own the full lifecycle of equipment specification, qualification, and ramp.
- Build supply chains for die, packages, components, consumable chemicals, and equipment for satellite compute manufacturing. Define incoming acceptance criteria for components and materials.
- Work closely with engineers from adjacent disciplines (mechanical, thermal, materials, electrical, software, test engineering, supply chain, silicon design, etc.) to deliver tightly integrated, high-performance hardware
- Challenge assumptions, question requirements, learn from your mistakes, and approach problems with an open mind
- Collaborate closely with leadership and stakeholders across all departments—including design, reliability, production, and supply chain to deliver best in class electronics.
- Manage compliance risks, ensuring safety and environmental compliance with industry standards.
- Mentor and develop engineers, providing technical guidance and project oversight.
BASIC QUALIFICATIONS:
- Bachelor's degree in materials science, mechanical engineering, or similar discipline.
- 5+ years experience in microelectronics device research or manufacturing.
PREFERRED SKILLS AND EXPERIENCE:
- Experience in hardware, robotics, automation, or manufacturing environments
- Experience designing tooling, fixtures, or jigs for assembly or test applications
- Exposure to scripting or data analysis tools (e.g. MATLAB, JMP, or equivalent) for process data analysis or automation
- Experience working with precision assemblies, robotic systems, or automated pick-and-place equipment
- Familiarity with manufacturing process development methodologies (e.g., PFMEA, process capability studies, SPC)
- Exposure to GD&T and tolerance analysis as applied to fixture and tooling design
- Experience with or interest in production data systems, MES, or manufacturing traceability infrastructure
- Familiarity with cleanroom or controlled-environment manufacturing practices
ADDITIONAL REQUIREMENTS:
- Ability to work extended hours or weekends as needed for mission critical deadlines
- Some travel may occasionally be required
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| New Graduate Engineer, Propulsion (Raptor) Raptor Combustion Devices - Engineering | — | Tailor | |
| Global GTM Strategy Lead (Starlink) Starlink Consumer | — | Tailor | |
| Security Operations Analyst Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Production Supervisor (Starlink Aviation) Starlink Aviation Production - Redmond | — | Tailor |
- New Graduate Engineer, Propulsion (Raptor)Hawthorne, CANov 21Raptor Combustion Devices - Engineering
- Global GTM Strategy Lead (Starlink)Hawthorne, CANov 21Starlink Consumer
- Security Operations AnalystBastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Bastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Palo Alto, CANov 21Security - Corporate
- Production Supervisor (Starlink Aviation)Woodinville, WANov 20Starlink Aviation Production - Redmond