Manufacturing Engineer, AI Satellites (Starmind) at SpaceX
Bastrop, TXMesh OpticalPosted Aug 11, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
MANUFACTURING ENGINEER, AI SATELLITES (STARMIND)
SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high-performance electrical compute hardware, solar power systems, thermal radiators, and more. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.
The Starmind team designs, builds, and operates the orbital compute fabric of the future. We develop nearly every key piece of technology in house – from the satellites’ flight computers and power systems to the fully custom compute electronics, memory, and networking that form the brain of our on-orbit data centers. As a Manufacturing Engineer on the Starmind team, you’ll have ownership over the entire manufacturing line for the hardware that enables advanced on-orbit AI processing and data center workloads. Your work spans the assembly, integration, and testing of industry-leading compute electronics, memory, and networking in order to achieve required domain sizes and processing workloads.
RESPONSIBILITIES
- Own the development and optimization of high-rate manufacturing for satellite
- Own the full lifecycle of equipment specification, validation, and process development— including device modeling, characterization of performance metrics, and materials failure analysis.
- Build supply chains for wafers, gases, chemicals, and equipment for solar cell manufacturing. Define incoming acceptance criteria for materials (e.g. silicon wafers, conductive pastes).
- Address material and process challenges in panel-level packaging while spearheading the development of next-generation dielectric materials to improve packaging performance and scalability.
- Specify and implement in-process metrology tools for quality control. Design wafer-level test structures to evaluate material/electronic properties. Integrate simulation tools with experimental data to guide and drive targeted improvements via material or process changes.
- Drive end-to-end material and process R&D programs, from concept through product implementation, to drive cost down, efficiency improvements, and reliability in electronic systems.
- Collaborate closely with leadership and stakeholders across all departments—including design, reliability, production, and supply chain—to integrate materials innovations into product roadmaps and ensure accountability for operations and reliability.
- Manage compliance risks related to materials and processes, ensuring safety and environmental compliance with industry standards.
BASIC QUALIFICATIONS:
- Bachelor's degree in an engineering degree.
- Experience in microelectronics device research or manufacturing.
PREFERRED SKILLS AND EXPERIENCE:
- Internship, co-op, or early-career experience in hardware, robotics, automation, or manufacturing environments
- Experience designing tooling, fixtures, or jigs for assembly or test applications
- Exposure to scripting or data analysis tools (e.g., Python, MATLAB, or equivalent) for process data analysis or automation
- Experience working with precision assemblies, robotic systems, or automated pick-and-place equipment
- Familiarity with manufacturing process development methodologies (e.g., PFMEA, process capability studies, SPC)
- Exposure to GD&T and tolerance analysis as applied to fixture and tooling design
- Experience with or interest in production data systems, MES, or manufacturing traceability infrastructure
- Familiarity with cleanroom or controlled-environment manufacturing practices
ADDITIONAL REQUIREMENTS:
- Ability to work extended hours or weekends as needed for mission critical deadlines
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| New Graduate Engineer, Propulsion (Raptor) Raptor Combustion Devices - Engineering | — | Tailor | |
| Global GTM Strategy Lead (Starlink) Starlink Consumer | — | Tailor | |
| Security Operations Analyst Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Production Supervisor (Starlink Aviation) Starlink Aviation Production - Redmond | — | Tailor |
- New Graduate Engineer, Propulsion (Raptor)Hawthorne, CANov 21Raptor Combustion Devices - Engineering
- Global GTM Strategy Lead (Starlink)Hawthorne, CANov 21Starlink Consumer
- Security Operations AnalystBastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Bastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Palo Alto, CANov 21Security - Corporate
- Production Supervisor (Starlink Aviation)Woodinville, WANov 20Starlink Aviation Production - Redmond