Hardware Reliability Specialist (Starlink) at SpaceX
Bastrop, TXStarlink Reliability - BastropPosted Nov 9, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
HARDWARE RELIABILITY SPECIALIST (STARLINK)
SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world’s largest satellite constellation and most advanced broadband internet system. We provide reliable and fast internet to millions of users worldwide, including populations with little or no connectivity, rural communities, aircraft, watercraft, and places where existing services are unreliable, too expensive, or disconnected by natural disasters. We design, build, test, and operate all parts of the system: thousands of satellites and consumer antennae that allow users to connect within minutes of unboxing. The Starlink team is seeking out the best-in-class professionals to maximize Starlink’s potential for communities and businesses around the globe.
The success of Starlink depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. We are looking for talented reliability specialists to take ownership of production quality and reliability for state-of-the-art manufacturing processes across Starlink user terminal production (a high-volume manufactured product that consumers will have in their homes). Your work will form the backbone for millions of next-generation devices used all over the world. For homes, schools, businesses, vehicles, planes, or boats, this team plays an instrumental role in ensuring high-speed connectivity is available to all who need it.
RESPONSIBILITIES:
- Execute production non-conformance management processes including MRB, vendor defects, quality audits, and production containments for various Starlink manufacturing lines. Drive root cause, resolution, and preventative actions
- Analyze production defect data and hold quality reviews to drive root cause and corrective action. Identify continuous improvement opportunities for yield, performance and scrap
- Assist production in developing process improvements and provide training to production technicians to ensure Starlink standards are being met
- Monitor production first pass yield (FPY) and true yield to maintain a stable production environment capable of meeting the required production rate, reliability, and cost
- Ensure successful transition of products from development to high volume production
- Build relationships with cross-functional groups including manufacturing engineering, design engineering, supply chain, and customer support to identify, reduce, and ultimately eliminate impacts from production defects
- Perform area audits in compliance with ISO 9001 standards
BASIC QUALIFICATIONS:
- Bachelor’s degree in an engineering, math, or science-relate discipline OR high school diploma or equivalency certificate and 2+ years of experience in hands-on engineering, reliability, manufacturing, or quality environment
PREFERRED SKILLS AND EXPERIENCE:
- Associate or bachelor’s degree in engineering, math, or science discipline
- Experience conducting hardware root cause investigation and containment activity in a manufacturing environment
- Experience with J-STD-001 Class 2, IPC-A-610 Class 2 or equivalent hardware in production environment
- Experience programming, loading, and operating automated production or test equipment. Experience with electrical test, environmental test, HALT test. Experience in laboratory setting
- Demonstrated capability to think creatively and solve complex problems with little to no supervision on schedule as an individual or as a member of an integrated team
- Ability to deliver high-quality hardware in a fast-paced NPI environment. Ability to adapt and process changes quickly
- Excellent computer skills (e-mail, Microsoft Windows, ERP/MRP/MES systems, python, C, SQL)
- Excellent communication (written and verbal) and teamwork skills. Good written, oral, presentation, and documentation skills
- Demonstrated ability to use technical knowledge and quality background to understand the current state and the most optimal path forward. Ability to provide process and design improvement suggestions to engineering
- Ability to acquire new technical knowledge, particularly around how satellite subsystems operate and function
- Experience reading engineering drawings, including electrical PCBA schematics and mechanical tolerance stacking
- Experience developing process documents and procedures
- Experience with process failure mode and effects analysis (PFMEA)
- Experience in high-volume manufacturing setting
- Basic familiarity and/or certification with ISO 9001 standards
ADDITIONAL REQUIREMENTS:
- Able to work the following shifts:
- For Electrical Specialist:
- 1st shift (8:00am - 5:00pm, Mon - Fri)
- For Mechanical Specialist
- B Shift (5:00am - 5:00pm, Wed - Sat)
- This position is based in Bastrop, TX and requires being onsite - remote work not considered
- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform functions of this position
- Able to lift up to 25 lbs. unassisted
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| New Graduate Engineer, Propulsion (Raptor) Raptor Combustion Devices - Engineering | — | Tailor | |
| Global GTM Strategy Lead (Starlink) Starlink Consumer | — | Tailor | |
| Security Operations Analyst Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Production Supervisor (Starlink Aviation) Starlink Aviation Production - Redmond | — | Tailor |
- New Graduate Engineer, Propulsion (Raptor)Hawthorne, CANov 21Raptor Combustion Devices - Engineering
- Global GTM Strategy Lead (Starlink)Hawthorne, CANov 21Starlink Consumer
- Security Operations AnalystBastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Bastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Palo Alto, CANov 21Security - Corporate
- Production Supervisor (Starlink Aviation)Woodinville, WANov 20Starlink Aviation Production - Redmond