Electrical Hardware Engineer, AI Satellites (Starmind) at SpaceX
Bastrop, TXStarmind - Compute and PayloadsPosted Nov 9, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
ELECTRICAL HARDWARE ENGINEER, AI SATELLITES (STARMIND)
SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high performance electrical hardware ranging from power electronics, high speed digital systems, mixed signal designs, robust avionics, networking, and custom compute electronics. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.
We are seeking best-in-class Electrical Hardware Engineers to own the full lifecycle of the electronics that make Starmind possible. You’ll apply deep electrical engineering skill sets at the intersection of power conversion and distribution, high-speed digital communications, analog design, network integration, thermal management, signal integrity, and on-orbit compute to create the hardware backbone for next-generation space-based AI infrastructure.
We design, build, test, and operate all parts of the system. Your work sits at the intersection of electrical, mechanical, thermal analysis, software, and networking engineering that enables orbital compute capability. Challenges range from high-speed digital communications, analog, network system integration, power electronics, RF/optical devices, and high-performance compute electronics for space. Your work will include everything from system design and schematic capture to PCB layout oversight; as well as hardware troubleshooting to driving requirements for the underlying silicon and complete product production and test. This also includes driving successful business outcomes across interdisciplinary subsystems of the satellite, inclusive of mechanical and software engineering peers among other engineering disciplines. Sub-teams include:
Avionics: The backbone of Starmind satellites are the bus avionics systems which control the vehicle, convert and distribute kilowatts of power, route high-speed vehicle and user/compute traffic, and connect satellites to each other via our state-of-the-art Space Lasers! The team is responsible for the design, development, and ultimate success of these avionics systems from concept to grave.
Payload: The Payload team is responsible for the design of custom AI compute electronics that push the forefront of AI chip performance, interconnectivity, and cluster size. Everything from high-power AI chips to high throughput network switching to high density storage conversion. The team owns the design, development, and ultimate success of this hardware from concept to grave.
RESPONSIBILITIES
- Rapidly develop high-reliability electronics for satellites and spacecraft.
- Drive system trades, requirements capture, component selection, analysis, schematic capture, PCB layout, prototyping, hardware bring-up, debugging, documentation, manufacturing, test, and on-orbit performance of complex electrical designs
- Get hands-on and support hardware through production, satellite integration, and flight
- Determine layer stackup, perform component package selection, component placement, routing feasibility studies, and signal routing of digital, analog, RF, and power conversion of PCBs
- Library creation and maintenance
- Create and release documentation for fabrication of PCBs
- Collaborate with internal teams and PCB vendors to continually improve design rules, constraints and design for test and manufacture guidelines
- Work closely with engineers from adjacent disciplines (mechanical, thermal, software, test engineering, supply chain, silicon design, etc.) to deliver tightly integrated, high-performance hardware
- Challenge assumptions, question requirements, learn from your mistakes, and approach problems with an open mind
BASIC QUALIFICATIONS
- Bachelor’s degree in electrical engineering, computer engineering, or physics
- 1+ years of experience designing circuits, electronic products, or hardware (internships/co-ops are applicable)
PREFERRED SKILLS AND EXPERIENCE
- Master’s degree in electrical engineering, computer engineering, or similar engineering degree
- 2+ years of professional experience rapidly designing and delivering highly reliable products
- 2+ years of electronic product experience designing hardware from concept through production; strong emphasis on full life-cycle development of new hardware products and not small incremental updates to legacy hardware
- 2+ years of experience designing and implementing mixed-signal circuit boards from concept through production using processors, FPGAs, Ethernet, multi-GHz Serdes, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components
- 2+ years of professional experience testing, troubleshooting, and debugging electronics
- Strong understanding of computers and programming languages (Python, C/C++)
- Demonstrated ability to work in a highly cross-functional role
- 2+ years working on aerospace systems
ADDITIONAL REQUIREMENTS
- This position is 100% onsite and requires relocation to the Austin-Bastrop area if not already local – remote or hybrid work not considered
- Ability to work extended hours or weekends as needed for mission critical deadlines
- Some travel may occasionally be required
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| GNC Engineer (Starship) Starship GNC | — | Tailor | |
| Supplier Quality Specialist (SpaceXSI) Starlink - Supply Chain Engineering | — | Tailor | |
| SPMT Operator - Transport (Starship) Starship Critical Lift & Transport | — | Tailor | |
| Critical Lift Technician - Transport (Starship) Starship Critical Lift & Transport | — | Tailor |
- Sr. Sourcing Specialist (Network Infrastructure)Austin, TXNov 21Supercompute and Operations
- Sr. Sourcing Specialist (Network Infrastructure)Bastrop, TXNov 21Supercompute and Operations
- GNC Engineer (Starship)Starbase, TXNov 21Starship GNC
- Supplier Quality Specialist (SpaceXSI)Bastrop, TXNov 21Starlink - Supply Chain Engineering
- SPMT Operator - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport
- Critical Lift Technician - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport