Development Test Technician - 2nd Shift at SpaceX
Starbase, TXStarship Structural Test - TechsPosted Jul 15, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
DEVELOPMENT TEST TECHNICIAN - 2ND SHIFT
Test technicians for the Starbase Structures team are highly multidisciplinary, and this individual will be tasked with a wide variety of test operations and test equipment fabrication work. The team consists of technicians and engineers working closely together to build mechanical and fluid assemblies, modify and integrate test articles, build data and control systems, and support testing operations.
RESPONSIBILITIES:
- Build, modify, and troubleshoot new or existing test equipment, ranging from fluid systems, mechanical assemblies, data and control systems, and instrumentation
- Fabricate high-pressure fluid panels, plumbing, and hydraulic manifolds, including tube fabrication and routing, cleaning, proofing, and activating
- Install instrumentation, build and route harnessing, and troubleshoot instrumentation and wiring issues
- Build, operate, and troubleshoot hydraulic systems, including pumps, actuators, servos, winches, etc.
- Assemble, modify, and inspect test articles, including structural fabrication (precision drilling, doublers, brackets, blending, painting, bonding, etc.), leak detection, non-destructive testing, and instrumentation installation (strain gauges)
- Participate in rigging and crane operations for test equipment and test articles, including hangar bridge cranes and mobile crane lifts
- Build and modify data and control systems, ranging from small mobile DAQs to large data and control infrastructure for test stands with thousands of channels
- Maintain, calibrate, configure, monitor, test, troubleshoot, install, and repair instrumentation, process controls, data acquisition systems, and electrical systems
- Participate in test operations, including configuration of high-pressure, hazardous, and cryogenic fluid systems, connecting hydraulic actuators and instrumentation, controlling hazardous areas, troubleshooting instrumentation and test hardware, and monitoring test video and data
BASIC QUALIFICATIONS:
- High school diploma or equivalency certificate
- 3+ years of experience with one or more of the following: working with and troubleshooting mechanical systems, high-pressure fluid systems, instrumentation (strain gauges, load cells, temperature sensors, deflection gauges, accelerometers, or pressure transducers), data and control systems, or test operations on mechanical or electrical systems
PREFERRED SKILLS AND EXPERIENCE:
- Ability to rapidly change roles and responsibilities, and learn new skills while working in a fast-paced and challenging work environment
- Associate degree in an engineering, mechanical, electrical systems, or other related field
- A&P license
- Computer skills, including experience using Microsoft Office, Teamcenter, NX
- Experience reading/interpreting planning documents, schematics, wiring diagrams, specifications, drawings, manuals, blueprints, and engineering sketches
- Experience with aerospace testing (propulsion, structural, etc.)
- Experience in airframe structural repair
- Experience with hydraulic plumbing repair/fabrication
- Experience with non-destructive inspection equipment and techniques
- Experience with precision measuring instruments/equipment
- Knowledge of various fittings (NPT, MS, AN, Swagelok, medium pressure)
- Knowledge of various fasteners (Hi-Lok, rivets, NAS, MS, SAE Grade 5 / 8, locking inserts, locking nuts, super bolts, etc.)
- Experience with aerospace or military-grade harness fabrication
- Knowledge of data acquisition and controls concepts, hardware, and interfacing (National Instruments PXI / cSeries and PLC)
- Experience with the fabrication of data and control systems (junction boxes, rack mount hardware, etc.)
- Experience with electrical tools (oscilloscopes, multimeters, soldering irons, crimpers, strippers, etc.)
- Experience with component and system-level troubleshooting skills and the ability to logically solve instrumentation system problems and determine corrective action
- Experience with DC power supplies, distribution, DC-DC converters, and uninterruptible power supplies (UPS)
- Experience with analog and digital instrumentation (load cells, pressure transducers, strain gauges, encoders, deflection gauges, and accelerometers)
- Experience with ground support equipment fabrication or modification in the aerospace industry
- Experience with rigging, cranes, and lift operations
ADDITIONAL REQUIREMENTS:
- Anticipated hours for this position are 1:00 p.m. – 11:00 p.m.
- Must be available for overtime and weekends as the schedule varies depending on site operational needs; flexibility is required
- Ability to support shift rotations as site demands change
- Flight hardware is typically built in tight quarters, and physical dexterity is required
- Valid driver's license and a clean driving record
- Typically exposed to work in extreme outdoor environments - heat, cold, rain
- Work performed in an environment requiring exposure to fumes, odors, and noise
- Must be able to travel to other SpaceX facilities when needed (up to 25% travel)
- Stand: Up to 10 hours per day
- Sit: Up to 3 hours per day
- Push/Pull: Up to 75 lbs. (unassisted) between 1 to 2 hours per day
- Overhead reach: Up to 10 hours per day
- Walk: Up to 10 hours per day
- Lift/Carry: Up to 50 lbs. (unassisted) between 1 to 2 hours per day
- Climb (ladder/stairs): Up to 6 hours per day
- Kneel/Crouch: Up to 10 hours per day
- Upper body twist: Up to 6 hours per day
- Ability to work in temperatures over 80 degrees for 6 hours or more per day
- Candidate must be capable of safely working at heights (up to 500 ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description - the candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| GNC Engineer (Starship) Starship GNC | — | Tailor | |
| Supplier Quality Specialist (SpaceXSI) Starlink - Supply Chain Engineering | — | Tailor | |
| SPMT Operator - Transport (Starship) Starship Critical Lift & Transport | — | Tailor | |
| Critical Lift Technician - Transport (Starship) Starship Critical Lift & Transport | — | Tailor |
- Sr. Sourcing Specialist (Network Infrastructure)Austin, TXNov 21Supercompute and Operations
- Sr. Sourcing Specialist (Network Infrastructure)Bastrop, TXNov 21Supercompute and Operations
- GNC Engineer (Starship)Starbase, TXNov 21Starship GNC
- Supplier Quality Specialist (SpaceXSI)Bastrop, TXNov 21Starlink - Supply Chain Engineering
- SPMT Operator - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport
- Critical Lift Technician - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport