Automation and Controls Engineer, Gateways (Starlink) at SpaceX
Bastrop, TXStarlink Gateway EngineeringPosted Sep 18, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
AUTOMATION AND CONTROLS ENGINEER, GATEWAYS (STARLINK)
At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the globe.
One key component of SpaceX’s success so far is our commitment to keeping all engineering and production in-house, which enables a tight feedback loop, nimble decision making, and speedy deliverables. Automation and Controls Engineers at our Bastrop site are hyper-focused on designing and developing full factory solutions for novel technologies that are critical to our mission of connecting the unconnected. As a member of this team, you will lead creative, multi-disciplinary projects spanning machine design, robotics, motion systems, and factory health monitoring that all come together to form the innovative, high-rate factories that allow us to deliver internet to those that need it most.
RESPONSIBILITIES:
- Design, develop, and manage automation projects - this includes initial factory ideation, machine commissioning, and proof of rate capability, and eventual hand-off to operational teams
- Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable, and reusable for high-volume manufacturing applications
- Keep our factory safe and reliable by implementing ANSI/RIA15.06/OSHA compliant systems for robots, gantries, conveyors, and other manufacturing equipment
- Generate aesthetically simple HMI screens to make complex machines easy to understand, operate, and troubleshoot
- Design electrical systems compliant to NEC, NFPA, & UL508A regulations
- Stay organized by creating schedules and budgets, and then motivate the team to achieve them
BASIC QUALIFICATIONS:
- Bachelor's degree in an engineering, physics, or computer science discipline
PREFERRED SKILLS AND EXPERIENCE:
- Excited by a quick and iterative design and manufacturing role
- Proven ability to solve complex problems with simple solutions in both design and implementation stages
- Excellent written and verbal communication skills, with the ability to make plans and directional recommendations collaboratively and cross-functionally
- Ability to engineer creative, new approaches to problems while adhering to ANSI/RIA15.06/OSHA safety requirements to keep a factory safe
- Experience with at least one of the specific disciplines listed below. The ideal candidate is interested in learning at least the fundamentals of the other areas they are not yet strong in
Mechanical:
- Machine design with focus on speed, reliability, maintainability, and safety
- Motion system sizing and implementation (gantries, robotics, conveyance, motors, actuators, pneumatics/hydraulics, sensor selection and integration, etc.)
- Fundamental structures hand calculations and ability to design for strength and stiffness
- CAD and product lifecycle management programs to generate detailed designs and drawing packages utilizing geometric dimensioning and tolerancing, preferred Siemens NX and Teamcenter
- Familiarity with manufacturing processes and how to design for manufacturability
- Exposure to some variety of production machinery, industrial sensors, and equipment (motion systems, dispense systems, temperature controllers, laser distance sensors, injection molders, die casters, etc.)
Electrical:
- Electrical sizing of motors, cables, circuit protection, VFDs, motor starters, various other motion systems
- Design of fail-safe electrical circuits using both safety logic controllers and safety-rated relays
- Hands-on experience troubleshooting industrial electrical systems using tools like multimeters, oscilloscopes, EMI probes
- Proficiency in understanding and creating electrical schematics and single line diagrams (EPLAN preferred)
- Field bus networks, serial communication, and Ethernet communication
- Hands-on experience designing and commissioning high quality electrical panels and electro-mechanical systems with appropriate safety considerations in mind
- Knowledge of NEC, NFPA, UL508A codes with ability to ensure compliance with control system safety standards
Industrial Software:
- PLC programming, preferably Beckhoff TwinCAT structured text programming
- Programming and implementing machine safety software through the use of safety PLC’s
- HMI, SCADA, IoT (MQTT, OPC-UA), ignition systems with focus on user friendly navigation and machine health monitoring and control
- Field Bus Networking protocols, preferably EtherCAT, Profinet, Profisafe, Ethernet/IP
- Robotics programming, preferably ABB
- Industrial software application to mechanical assemblies, electrical systems, sensors, pneumatics/hydraulics, including how to safely checkout these interdisciplinary systems prior to production implementation
ADDITIONAL REQUIREMENTS:
- Ability to work long hours and weekends as necessary to support critical milestones
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor | |
| Mechanical Design Engineer, Battery Pack Robotics | OpenAI | $287K–$423K | Tailor | |
| Senior Manufacturing Engineer Imaging - AIRS | Anduril Industries | $140K–$185K | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
- Mechanical Design Engineer, Battery PackSan Francisco$287K–$423KNov 20Robotics
- Senior Manufacturing EngineerHudson, NH$140K–$185KNov 20Imaging - AIRS
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All hardware, robotics and embedded jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| New Graduate Engineer, Propulsion (Raptor) Raptor Combustion Devices - Engineering | — | Tailor | |
| Global GTM Strategy Lead (Starlink) Starlink Consumer | — | Tailor | |
| Security Operations Analyst Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Security Protective Operations Center Operator (Night Shift) Security - Corporate | — | Tailor | |
| Production Supervisor (Starlink Aviation) Starlink Aviation Production - Redmond | — | Tailor |
- New Graduate Engineer, Propulsion (Raptor)Hawthorne, CANov 21Raptor Combustion Devices - Engineering
- Global GTM Strategy Lead (Starlink)Hawthorne, CANov 21Starlink Consumer
- Security Operations AnalystBastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Bastrop, TXNov 21Security - Corporate
- Security Protective Operations Center Operator (Night Shift)Palo Alto, CANov 21Security - Corporate
- Production Supervisor (Starlink Aviation)Woodinville, WANov 20Starlink Aviation Production - Redmond