Avionics Engineer II - Design at Rocket Lab
Auckland, NZ4010 NZ-Space SystemsPosted Nov 17, 2026
About the role
As published on Rocket Lab's job board, updated Nov 17, 2026.
ABOUT ROCKET LAB
Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity’s reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us.
While other companies talk about it, we do it!
ABOUT SPACE SYSTEMS AT ROCKET LAB:
Rocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.
AVIONICS ENGINEER II - DESIGN
The Avionics Engineer II – Design is responsible for the design, development, and verification of spacecraft avionics within Rocket Lab's Space Systems division. This role focuses on independently owning the design of flight-critical PCBAs, including power electronics, motor control systems, and distribution units, from initial concept through to production readiness. With guidance from senior engineers on complex architectures and technical trade-offs, you will develop circuit designs, perform electrical analyses, and verify that hardware meets performance requirements for the demanding space environment. Your contributions will support multiple flight programs as you deepen your expertise in avionics design, take ownership of multi-disciplinary interfaces, and begin supporting the development of junior engineers.
WHAT YOU'LL GET TO DO:
- Independently design and develop flight-quality PCB/PCBAs, including schematic capture, component selection, and design documentation to support spacecraft avionics systems.
- Perform circuit design for power electronics, control systems, and interface modules, applying solid electrical engineering principles to meet performance, reliability, and space environment requirements.
- Conduct electrical analyses including Worst-Case Analysis (WCA), power budgets, thermal derating, and signal integrity assessments to verify design robustness.
- Lead component selection for space applications, evaluating parts for radiation tolerance, outgassing, reliability, and availability while balancing program constraints.
- Lead the bring-up and functional verification of prototype and first-article hardware, performing hands-on debugging, measurement, and characterization of circuit performance.
- Execute design verification testing and document results, ensuring hardware meets specification requirements and driving design iteration where needed.
- Support and help plan environmental testing activities (Thermal Vacuum, Vibration, Shock, EMI/EMC) by preparing test procedures, monitoring hardware performance, and analyzing results.
- Participate in and contribute meaningfully to peer design reviews, offering constructive feedback to junior engineers and incorporating input from senior engineers to improve design quality.
- Thoroughly document designs, including creating and maintaining schematics, bills of materials, test reports, and design justification documents to support configuration management and traceability.
- Collaborate with cross-functional teams including Test, Manufacturing, Systems Engineering, Propulsion and other subsystem groups to resolve interface issues and support integrated system development.
YOU'LL BRING THESE QUALIFICATIONS:
- Bachelor's degree or higher in Electrical Engineering, Mechatronics, Electronics, or a related field.
- 3-5+ years of experience in electronics design or hardware development, with demonstrated ownership of circuit design and hardware verification tasks.
- Solid foundation in electronics fundamentals: power electronics, analogue and digital circuit design, signal integrity, and grounding principles.
- Proficiency in schematic capture and PCB layout review using eCAD tools (Altium Designer preferred).
- Experience with circuit simulation tools (LTspice, SPICE, or equivalent) for design verification and analysis.
- Hands-on experience with standard laboratory instrumentation including oscilloscopes, power supplies, multimeters, and electronic loads.
- Ability to read datasheets, perform component-level analysis, and troubleshoot hardware issues using first principles with minimal guidance.
- Strong documentation skills and attention to detail in creating technical reports, design specifications, and test documentation.
- Effective communication and collaboration skills, with demonstrated ability to work within and support cross-functional engineering teams.
- Experience performing electrical analyses such as Worst-Case Analysis (WCA), thermal analysis, or power budgeting.
THESE QUALIFICATIONS WOULD BE NICE TO HAVE:
- Experience designing power electronics, including DC-DC converters, linear regulators, or power distribution circuits.
- Knowledge of motor drive electronics or precision analogue control circuits.
- Familiarity with space-specific design considerations such as radiation effects, thermal management in vacuum, or component derating.
- Understanding of Design for Manufacturing (DFM) and Design for Test (DFT) principles.
- Exposure to environmental testing (Thermal Vacuum, vibration, EMI/EMC) or qualification testing to aerospace standards.
- Experience with programming languages (Python, MATLAB) for data analysis or test automation.
- Familiarity with FPGA development (Verilog/VHDL) or embedded software for hardware interfaces.
- Knowledge of high-voltage circuit design and safety practices.
- Understanding of requirements management and configuration control processes in a regulated or high-reliability environment.
- Some experience mentoring or providing technical guidance to junior engineers.
If the above sounds like you apply now!
WHAT TO EXPECT
We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.
Important information:
FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.
Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at g.biow@rocketlabusa.com.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.
FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:
For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.
Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.
Similar roles at other companies
Open hardware, robotics and embedded jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Manager, Cluster Hardware and Software Lab Software Engineering | Cerebras Systems | — | Tailor | |
| Senior Propulsion Engineer - Engine SME, Omen TESTING | Anduril Industries | $167K–$222K | Tailor | |
| IT Support Technician (Help Desk) Information Technology - Services | SpaceX | — | Tailor | |
| Sourcing Manager (Silicon/EE Components) Supply Chain | Oura | $151K–$178K | Tailor | |
| Mechanical Engineer, Non-Destructive Evaluation NonDestructive Evaluation - Engineering | SpaceX | — | Tailor | |
| Soft Goods Technician Manufacturing Operations | 1X Technologies | $30–$47/hr | Tailor |
- Senior Technical Manager, Cluster Hardware and Software LabRemoteSunnyvale, CANov 21Software Engineering
- Senior Propulsion Engineer - Engine SME, OmenCosta Mesa, CA$167K–$222KNov 20TESTING
- IT Support Technician (Help Desk)Hawthorne, CANov 20Information Technology - Services
- Sourcing Manager (Silicon/EE Components)Hybrid - San Francisco, CA$151K–$178KNov 20Supply Chain
- Mechanical Engineer, Non-Destructive EvaluationHawthorne, CANov 20NonDestructive Evaluation - Engineering
- Soft Goods TechnicianSan Carlos, CA$30–$47/hrNov 20Manufacturing Operations
All hardware, robotics and embedded jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the hardware and robotics engineer resume guide and the interview questions for the role.
- Apply on Rocket Lab's site. Applications never pass through OneTwo Resume.
About Rocket Lab
Launch and space systems company that flies the Electron rocket and builds spacecraft and components.
All open roles at Rocket Lab · All hardware, robotics and embedded jobs at AI and tech companies
More roles at Rocket Lab
| Role | Salary | Posted | Actions |
|---|---|---|---|
| Principal Software Security Engineer 4751 Space Systems Software | $150K–$215K | Tailor | |
| Principal Software Security Engineer 4751 Space Systems Software | $173K–$259K | Tailor | |
| Senior Quality Engineer I 5552 RMC - Manufacturing | $95K–$131K | Tailor | |
| Senior Systems Engineer I 5557 RMC - Systems Engineering | $124K–$155K | Tailor | |
| Production Planner II 5551 RMC - Operations | $72K–$90K | Tailor | |
| Radar RF Design Engineer I 4015 USA Space Systems | $88K–$132K | Tailor |
- Principal Software Security EngineerLittleton, CO$150K–$215KNov 214751 Space Systems Software
- Principal Software Security EngineerLong Beach, CA$173K–$259KNov 214751 Space Systems Software
- Senior Quality Engineer IPasadena, CA$95K–$131KNov 205552 RMC - Manufacturing
- Senior Systems Engineer IPasadena, CA$124K–$155KNov 205557 RMC - Systems Engineering
- Production Planner IIPasadena, CA$72K–$90KNov 205551 RMC - Operations
- Radar RF Design Engineer ILong Beach, CA$88K–$132KNov 204015 USA Space Systems