Build Specialist, Barrel Production (Starship) at SpaceX
Starbase, TXBarrel ProductionPosted Aug 6, 2026
About the role
As published on SpaceX's job board, updated Nov 18, 2026.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
BUILD SPECIALIST, BARREL PRODUCTION (STARSHIP)
The Build Specialist for Barrels and Domes Primary Structures focused on Root Cause, Escalations & Line Efficiency ensures quality, reliability, and efficient production of Starship’s core propellant tank structures. Through root-cause analysis, escalations ownership, and line optimization, the role enables the production rates and structural integrity needed for Starship’s high flight cadence.
RESPONSIBILITIES:
- Lead relentless, data-driven root cause analysis (5 Whys, fishbone, Pareto, etc.) on complex equipment failures, quality defects, process variability, and unplanned downtime; implement permanent countermeasures, poka-yoke solutions, and preventive/predictive strategies to eliminate repeat problems
- Own engineering escalations end-to-end: triage issues, coordinate with design/manufacturing/build reliability engineers, drive rapid resolution, verify fixes at the gemba, and document thoroughly for full traceability and compliance
- Drive day-to-day waste reduction and line efficiency on flexible barrel lines—optimize workflow, part flow, mixed-product sequencing, workstation layout, and material presentation to cut non-value-added time and improve throughput
- Troubleshoot complex equipment and tooling issues, support repairs, and manage model/tooling changes to minimize disruption
- Conduct quality inspections, enforce process standards, escalate non-conformances immediately, and mentor technicians on best practices and standard work
- Drive continuous improvement and 5S: update work instructions, standardize best practices to close skill gaps and accelerate knowledge transfer, and implement workstation/process optimizations
- Support assembly process updates, new equipment integration, and seamless cross-shift/cross-department coordination
- Partner with engineering to improve utilization efficiency—provide clear feedback, data, and recommendations that reduce rework loops and strengthen the production-engineering partnership
- Verify safety, compliance, and process integrity on the floor; ensure every fix is robust and sustainable
BASIC QUALIFICATIONS:
- High school diploma or equivalency certificate and 2+ years of professional experience in a hands-on manufacturing environment; OR Bachelor's degree in an engineering, math, or science discipline
PREFERRED SKILLS AND EXPERIENCE:
- Associate or bachelor's degree in an engineering, math, or science discipline
- 2+ years in a manufacturing, process planning, or continuous improvement role with strong root-cause ownership
- 2+ years of professional experience in an aerospace, aviation, automotive, and/or manufacturing environment
- Experience in automated laser welding / laser cutting
- Proven experience leading structured problem-solving (5 Whys, A3, 8D, etc.) and implementing permanent countermeasures that prevent recurrence
- Hands-on experience with Lean tools (5S, waste elimination, value-stream thinking, Kanban, OEE, PFMEA, poka-yoke)
- Strong data analysis skills (Excel, VBA, SQL, or similar) for downtime, quality, and efficiency metrics
- Experience mentoring technicians, enforcing standards, and driving knowledge transfer
- Experience with equipment troubleshooting, tooling changes, workstation optimization, and flexible/mixed-model lines
- Excellent written and verbal communication skills; ability to escalate clearly and partner effectively with engineering and leadership
- Experience taking processes from development through rate production with focus on design for manufacturability and assembly
ADDITIONAL REQUIREMENTS:
- Must be able to work all shifts, overtime, and weekends as needed
- Ability to stand for extended periods (8+ hours minimum)
- Must be able to lift up to 25 lbs unassisted (and up to 50 lbs for short durations)
- Must be able to travel up to 5%
- Ability to work at elevated heights (up to 200 feet) and in confined spaces
- Able to work outdoors (heat, cold, rain) and in environments with fumes, odors, and noise
- Physical demands (approximate daily):
- Stand/Walk: up to 10 hours
- Sit: up to 3 hours
- Push/Pull: up to 75 lbs (unassisted) 1–2 hours
- Overhead reach / Upper body twist / Kneel/Crouch: up to 6 hours
- Climb (ladder/stairs): up to 3 hours
- Lift/Carry: up to 50 lbs (unassisted) 1–2 hours
- Work in temperatures over 80°F for short periods (≤30 min)
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.
Similar roles at other companies
Open operations, finance and people jobs elsewhere, newest first.
| Role | Company | Salary | Posted | Actions |
|---|---|---|---|---|
| Senior Technical Recruiter Talent | Labelbox | $160K–$180K | Tailor | |
| Associate Sourcing Specialist (6602) Aircraft | Shield AI | $70K–$125K | Tailor | |
| Division Operations, AFS AFS | Anduril Industries | $147K–$196K | Tailor | |
| Technical Recruiter Talent Acquisition | Relativity Space | $103K–$155K | Tailor | |
| Sr Mgr, Strategic Sourcing Manager, Corporate & Operations Corporate | Shield AI | $151K–$226K | Tailor | |
| Sr. People Systems Analyst, Advanced Comp IT | Harvey | $136K–$187K | Tailor |
- Senior Technical RecruiterSan Francisco Bay Area$160K–$180KNov 21Talent
- Associate Sourcing Specialist (6602)Dallas, TX$70K–$125KNov 21Aircraft
- Division Operations, AFSCosta Mesa, CA +1$147K–$196KNov 21AFS
- Technical RecruiterLong Beach, CA$103K–$155KNov 21Talent Acquisition
- Sr Mgr, Strategic Sourcing Manager, Corporate & OperationsRemoteArlington, VA$151K–$226KNov 21Corporate
- Sr. People Systems Analyst, Advanced CompRemoteDallas$136K–$187KNov 21IT
All operations, finance and people jobs at AI and tech companies
Before you apply
- Scan your resume against this posting to see which of its terms you are missing.
- Tailor your resume so the summary and bullets use the posting's own wording where it is true for you.
- Read the operations resume guide and the interview questions for the role.
- Apply on SpaceX's site. Applications never pass through OneTwo Resume.
About SpaceX
Rocket and spacecraft manufacturer that operates the Falcon and Starship launch vehicles and the Starlink satellite network.
All open roles at SpaceX · All operations, finance and people jobs at AI and tech companies
More roles at SpaceX
| Role | Salary | Posted | Actions |
|---|---|---|---|
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| Sr. Sourcing Specialist (Network Infrastructure) Supercompute and Operations | — | Tailor | |
| GNC Engineer (Starship) Starship GNC | — | Tailor | |
| Supplier Quality Specialist (SpaceXSI) Starlink - Supply Chain Engineering | — | Tailor | |
| SPMT Operator - Transport (Starship) Starship Critical Lift & Transport | — | Tailor | |
| Critical Lift Technician - Transport (Starship) Starship Critical Lift & Transport | — | Tailor |
- Sr. Sourcing Specialist (Network Infrastructure)Austin, TXNov 21Supercompute and Operations
- Sr. Sourcing Specialist (Network Infrastructure)Bastrop, TXNov 21Supercompute and Operations
- GNC Engineer (Starship)Starbase, TXNov 21Starship GNC
- Supplier Quality Specialist (SpaceXSI)Bastrop, TXNov 21Starlink - Supply Chain Engineering
- SPMT Operator - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport
- Critical Lift Technician - Transport (Starship)Starbase, TXNov 21Starship Critical Lift & Transport